Smith & Company Painting completed a sewing room floor coating in McMinnville, OR, resurfacing 484 square feet of concrete for a homeowner’s new sewing room, along with the stem walls and steps. Our two-person crew ground, repaired, and coated the floor in the Shoreline flake color in a single working day. Smith & Company Painting handled the full job.
Sewing Room Floor Coating in McMinnville, OR
Project Overview
The homeowner had turned an old garage into a sewing room and wanted the concrete floor finished to match, clean, comfortable underfoot, and easy to keep tidy, instead of a bare gray slab. So they called us for a sewing room floor coating in McMinnville, OR. We coated the floor, the stem walls, and the steps so the whole room would read as one surface instead of a coated floor with plain walls around it.
The standout here was speed and coverage. Because polyaspartic cures fast, our guys went from the first grinding pass to the final clear coat in one day, and every concrete surface in the room ended up matching.
Project Details & Client Info
- Location: McMinnville, OR (Yamhill County)
- Project type: Residential polyaspartic flake floor coating, converted sewing room
- Floor size: 484 square foot floor, plus stem walls and steps
- Flake color: Shoreline, 1/4 inch flakes
- System: polyaspartic base coat, broadcast flakes, clear polyaspartic top coat
- Duration: about one working day
- Cost range: $3,400 to $3,700
- Crew: two-person crew
- Crew Leader: Felipe Hernandez
- Estimator: Parker Smith
- Contractor: Smith & Company Painting, CCB License No. 169003
Why This Sewing Room Floor Coating Matters
Most floor coating jobs stop at the slab. Because the homeowner was turning this space into a sewing room, we carried the coating up the stem walls and over the steps, so the whole space reads as one finished room instead of a nice floor framed by bare foundation walls. That full-coverage look is what most people picture when they finish a room like this and rarely get.
Challenges Faced
- The floor had cracks that needed grinding out and filling before any coating went down, so the surface would sit flush and the finish would lay right.
- The stem walls had pits and divots. We filled the larger ones, though as we tell every customer, some imperfections in older concrete can still show through.
- Concrete expands and contracts with the weather, so cracks can reappear over time. We are upfront that this is normal and not something any coating can stop.
Our Sewing Room Floor Coating Process
- Ground the entire floor to strip dirt and open up the concrete for adhesion.
- Filled the cracks, then ground them flush with the rest of the floor.
- Filled the larger pits and divots in the stem walls.
- Applied the polyaspartic base coat across the floor, stem walls, and steps.
- Broadcast the 1/4 inch Shoreline flakes into the wet base coat.
- Once it cured, cleaned up the loose flakes and laid down one thick coat of clear polyaspartic.
Final Results
The finished floor came out clean and even, with the Shoreline flakes adding texture and hiding the day-to-day scuffs that always show up on a plain slab. Floor, stem walls, and steps all match, which is exactly the finished look the homeowner was after.
Because it is a polyaspartic system, the crew was in and out in a single day and the room was ready to use again quickly.
Location Details
This sewing room floor coating was done in McMinnville, OR, right in the heart of Yamhill County. We handle floor coating and painting for homeowners across the area, including nearby Newberg and Dundee. If you are weighing your options, take a look at how we apply epoxy coatings for our Oregon customers or our garage floor epoxy coating in McMinnville.
Frequently Asked Questions (FAQ)
How long does a sewing room floor coating take in McMinnville, OR?
This 484 square foot floor was ground, repaired, and fully coated in about one working day. Polyaspartic cures fast, so most residential floors are back in use within a day or two.
What is the difference between polyaspartic and epoxy floor coatings?
Polyaspartic cures much faster than epoxy and stands up well to daily use and UV, which is why we used it here. Epoxy is still a solid pick for plenty of indoor floors.
Can you coat the stem walls and steps, not just the floor?
Yes. On this McMinnville job we coated the slab, the stem walls, and the steps so the whole room matches instead of leaving bare gray walls.
Will the cracks in my concrete floor come back after coating?
We grind out and fill cracks before coating, but concrete moves as the weather changes, so cracks can reappear over time. That is normal and not covered by warranty.
About Smith & Company Painting
Smith & Company Painting provides residential, commercial, and industrial painting services across Northwest Oregon. Led by Parker Smith, our team focuses on craftsmanship, reliability, and long-lasting results.
CCB License: CCB License No. 169003
Why Choose Smith & Company
Visit us: 570 SE Davis St, McMinnville, OR 97128
Call us: 503-472-4334
Learn more: smithandcompanypainting.com
Smith & Company Social Media Pages
Facebook Instagram Tiktok YouTube LinkedIn X
