Smith & Company Painting completed a garage floor coating in Lebanon, OR, grinding and repairing a 540 sq ft garage floor, then coating it, the stem walls, and the steps in polyaspartic with Mediterranean flake. A two-person crew drove down from McMinnville and finished it in one day.
How We Finished a Garage Floor Coating in Lebanon, OR in One Day

Project Details & Client Info
- Location: Lebanon, OR
- Project type: Residential garage floor coating, polyaspartic flake
- Floor size: 540 sq ft, plus stem walls and steps
- Repairs: Cracks filled and ground flush, joint cracks sealed, 1 low spot about 1.5 ft wide filled
- Coating system: Polyaspartic base coat, broadcast flake, 1 thick clear polyaspartic topcoat
- Flake color: Mediterranean, 1/4-inch flake
- Crew: 2 installers, led by Felipe Hernandez
- Duration: 1 working day, about 19 crew-hours
- Cost range: $3,500 to $4,500
- Estimator: Parker Smith
- License: CCB License No. 169003
Challenges Faced
- A long drive for a one-day job: Lebanon is a good drive south of our McMinnville shop, so the crew was on the clock by 5:30 am to have the whole floor ground, repaired, and coated before the end of the day.
- A low spot in the slab: One area about 1.5 feet across sat roughly 1/4 inch lower than the rest of the floor. Flake coating follows whatever shape the concrete has, so we filled it and ground it flush first.
- Cracks inside the control joints: Control joints are cut into concrete to give it a place to crack. Instead of filling the joints all the way, we sealed the cracks at the bottom of each joint and left the joint itself open.
Our Garage Floor Coating Process
- Ground the entire floor to remove dirt and open up the concrete so the coating can bond. (The floor and stem walls were pressure washed ahead of time.)
- Filled all cracks and the low spot, then ground them flush with the floor.
- Sealed the cracks at the bottom of the control joints.
- Applied the polyaspartic base coat and broadcast the Mediterranean flake.
- Coated the stem walls and steps.
- Once dry, scraped and swept up the loose flake.
- Applied one thick coat of clear polyaspartic over the whole floor.
Final Results
The patched cracks and the filled low spot disappear under the Mediterranean flake, and the clear topcoat leaves a floor that wipes clean instead of soaking up oil and dirt like bare concrete. Carrying the coating up the stem walls and over the steps gives the garage one finished look from the floor up.
Location Details
This project was in Lebanon, OR, in the southern Willamette Valley. Our crews are based in McMinnville, OR, and we travel for garage floor coatings when the job is a good fit. See a similar job in our garage floor crack repair in McMinnville case study, or our McMinnville garage floor epoxy coating post.
Frequently Asked Questions (FAQ)
How much does a garage floor coating cost in Lebanon, OR?
This 540 sq ft garage, with crack repairs, a filled low spot, and coated stem walls and steps, came in between $4,000 and $4,200 for labor and materials. Your price depends on floor size, how much repair the concrete needs, and whether we coat stem walls and steps.
Do you prep stem walls before coating them?
No. We apply the coating directly to the stem walls without grinding or etching, so any pits or imperfections will still be there, though they will most likely be a little less visible.
Do I need to pressure wash my garage floor before you coat it?
Yes, if it hasn’t been done. We ask that the floor and stem walls be aggressively pressure washed at least 2 to 3 weeks before we arrive, so the concrete has time to dry out.
How long does a garage floor coating take?
This one took our two-person crew one day, about 19 crew-hours, from grinding through the clear topcoat.
About Smith & Company Painting
Smith & Company Painting is a family-run residential, commercial, and industrial painting contractor based in McMinnville, OR, serving Yamhill County and the Willamette Valley. We are licensed under CCB License No. 169003 and handle everything from exterior repaints to floor coatings.
Contact Smith & Company Painting for expert residential exterior painting in Dayton, OR and throughout Northwest Oregon.
Smith & Company Social Media Pages
Facebook Instagram Tiktok YouTube LinkedIn X

