Smith & Company Painting completed a polyaspartic floor coating at a home in Vancouver, WA, grinding just under 700 sq ft of concrete, filling and grinding flush every crack and joint, then coating it in polyaspartic with 1/4-inch Gravel flake and a thick clear topcoat.
Polyaspartic Floor Coating in Vancouver, WA: Just Under 700 Sq Ft of Gravel Flake

Project Details & Client Info
- Location: Vancouver, WA
- Project type: Residential polyaspartic flake floor coating
- Floor size: Just under 700 sq ft
- Repairs: All cracks and joints filled and ground flush
- Coating system: Polyaspartic base coat, broadcast flake, 1 thick clear polyaspartic topcoat, 4″ black rubber cove base
- Flake color: Gravel, 1/4-inch flake from Rodda, about 80 lbs
- Cost range: $6,500 to $8,500
- Estimator: Parker Smith
- License: CCB License No. 169003
Challenges Faced
- Cracks and joints: Coating straight over a crack just gives you a shiny crack. Each crack and joint was filled, then ground flush with the rest of the floor so the flake lies flat across it.
Our Polyaspartic Floor Coating Process
- Ground the entire floor to remove dirt and open up the concrete so the coating can bond.
- Filled all cracks and joints, then ground them flush with the floor.
- Applied the polyaspartic base coat and broadcast the Gravel flake.
- Once dry, scraped and swept up the loose flake.
- Applied one thick coat of clear polyaspartic over the whole floor.
- Installed 4″ black rubber cove base.
Final Results
The filled cracks and joints disappear under the Gravel flake, and the floor now has one even flake finish from wall to wall. The clear topcoat means spills and dirt wipe up instead of soaking into bare concrete.
Location Details
This project was in Vancouver, WA, just across the Columbia River from Portland, OR. Our crews are based in McMinnville, OR. See similar floors in our garage floor crack repair in McMinnville and garage floor coating in Lebanon case studies.
Frequently Asked Questions (FAQ)
How much does a polyaspartic floor coating cost in Vancouver, WA?
This residential floor, just under 700 sq ft with crack and joint repairs, came in between $1,300 and $1,400. Your price depends on floor size, how much repair the concrete needs, and whether stem walls or steps are included.
Why fill cracks and joints before a polyaspartic floor coating?
The coating follows the shape of the concrete, so open cracks and joints show right through the flake. Filling them and grinding them flush gives you a flat, even floor.
Will the cracks come back?
They can. Concrete expands and contracts as the weather changes, so a filled crack or joint may reappear down the road, and re-cracking is not covered by warranty.
What does Gravel flake look like?
Gravel is a 1/4-inch flake blend from Rodda. You can see it and other colors on our floor color samples page.
About Smith & Company Painting
Smith & Company Painting is a family-run residential, commercial, and industrial painting contractor based in McMinnville, OR, serving Yamhill County and the Willamette Valley. We are licensed under CCB License No. 169003 and handle everything from exterior repaints to floor coatings.
Contact Smith & Company Painting for expert residential exterior painting in Dayton, OR and throughout Northwest Oregon.
Smith & Company Social Media Pages
Facebook Instagram Tiktok YouTube LinkedIn X

